Peptide research glossary
Short, plain definitions of 110 terms used on COAs, in peptide chemistry, in storage and handling, and in regulatory records. Each term has its own link you can share.
For Research Use Only. Not for human or veterinary use.

A
- Acceptance criteriaAnalytical testing
- The numerical limits or conditions in a specification that a test result must meet for the lot to pass.
- Acetate saltPeptide chemistry
- A peptide supplied with acetate counter-ions, often obtained by ion exchange after purification.
- AcetylationPeptide chemistry
- Addition of an acetyl group, usually at the N-terminus, written as "Ac-" at the start of a sequence.
- AggregationPeptide chemistry
- Association of peptide molecules into larger clusters, which can reduce solubility and appear as extra peaks or cloudiness.
- AliquotHandling and storage
- A measured portion of a sample divided from a larger amount, so the rest is not repeatedly opened, warmed or thawed.
- Amber vialHandling and storage
- A brown glass vial that blocks much of the UV and visible light that can degrade light-sensitive materials.
- AmidationPeptide chemistry
- Replacement of the C-terminal carboxylic acid with an amide (–NH2), written as "-NH2" at the end of a sequence.
- Amino acidPeptide chemistry
- The building block of peptides, a molecule with an amine group, a carboxylic acid group and a side chain that gives each amino acid its properties.
- Amino acid analysis (AAA)Analytical testing
- Hydrolysis of a peptide into its amino acids followed by their quantification. It confirms composition and is a common way to determine net peptide content.
- AnaloguePeptide chemistry
- A synthetic molecule whose structure is based on a natural one but modified, for example by substituting or adding residues.
- Area percentAnalytical testing
- Purity expressed as the main peak area as a percentage of the total integrated peak area. It reflects relative purity of the detected components, not net peptide content.
- Average molecular weightAnalytical testing
- The molecular weight calculated from average natural isotope abundances. It is the value usually listed as "molecular weight" on product and reference pages.
B
- Bacteriostatic waterHandling and storage
- Sterile water containing 0.9% benzyl alcohol as a preservative to limit bacterial growth in multi-use containers.
C
- C-terminusPeptide chemistry
- The end of a peptide chain with a free carboxyl group, or a modified group such as an amide.
- CAS numberRegulatory
- A unique numeric identifier assigned to a chemical substance by the Chemical Abstracts Service. Different salt forms can have different CAS numbers.
- Certificate of Analysis (COA)Quality and documentation
- A document reporting the test results for one specific lot, such as purity by HPLC and identity by mass spectrometry, with the test date and lab. How to read a COA
- Chain of custodyQuality and documentation
- A documented record of who handled a sample and when, from collection to testing, so the result can be linked to the right material.
- ChelatePeptide chemistry
- A complex in which a molecule binds a metal ion at more than one point, as in a peptide–copper(II) complex.
- ChromatogramAnalytical testing
- The graph produced by a chromatography run, showing detector signal against time. Each peak represents one or more components of the sample. How to read a COA
- CleavagePeptide chemistry
- The step that releases a finished peptide from the synthesis resin and removes side-chain protecting groups, usually with TFA.
- COA verificationQuality and documentation
- Confirming that a COA belongs to the vial in hand and has not been altered, for example by checking the lot or serial number against the issuer’s published record. COA Reader
- Cold chainHandling and storage
- Keeping a material within a defined temperature range through storage and shipping.
- CompoundingRegulatory
- Preparation of a medication by a licensed pharmacist or physician, or an outsourcing facility, under specific legal rules (sections 503A and 503B of the FD&C Act).
- Counter-ionPeptide chemistry
- An ion paired with a charged peptide in its solid salt form, such as acetate, trifluoroacetate (TFA) or chloride.
- Cyclic peptidePeptide chemistry
- A peptide in which part of the chain is joined into a ring, for example through a lactam or disulfide bond.
D
- D-amino acidPeptide chemistry
- The mirror-image form of an amino acid. Most natural peptides use L-amino acids; D-forms are written with a "D-" prefix, such as D-Phe.
- DeamidationPeptide chemistry
- Conversion of an asparagine or glutamine side chain to an acid, a common degradation route that adds about 1 Da to the mass.
- Deletion sequencePeptide chemistry
- An impurity missing one or more residues because a coupling step did not go to completion.
- DesiccantHandling and storage
- A drying agent, such as silica gel, used to keep stored materials dry.
- DiluentHandling and storage
- The liquid used to dissolve or dilute a material in the laboratory.
- Disulfide bondPeptide chemistry
- A covalent S–S bond between two cysteine residues that can link parts of one chain or two separate chains.
E
- Endotoxin (LAL) testAnalytical testing
- A test for bacterial endotoxins using Limulus amebocyte lysate. Results are reported in endotoxin units (EU) per mg or per vial when the test is performed.
- ESIAnalytical testing
- Electrospray ionization. A gentle ionization method for MS that often produces multiply charged peptide ions, such as [M+2H]2+.
F
- FDA approvalRegulatory
- Authorization by the U.S. Food and Drug Administration to market a specific drug product for its labeled use. It applies to that product, not to the substance sold by others.
- Fmoc chemistryPeptide chemistry
- The most widely used SPPS strategy, which protects each incoming amino acid with an Fmoc group that is removed under mild basic conditions.
- FragmentPeptide chemistry
- A peptide that corresponds to part of a longer sequence, identified by residue numbers, for example "(11-13)".
- Free basePeptide chemistry
- The peptide without counter-ions. Reference molecular weights and some CAS numbers refer to the free base.
- Freeze–thaw cycleHandling and storage
- One round of freezing and thawing. Repeated cycles can degrade peptides in solution, so solutions are often divided into single-use aliquots.
G
- Good Laboratory Practice (GLP)Quality and documentation
- A quality system for how non-clinical laboratory studies are planned, performed, recorded and archived.
- Good Manufacturing Practice (GMP)Quality and documentation
- Regulations and guidelines for manufacturing drugs and other regulated products. Research-use materials are not necessarily made under GMP.
- Gradient elutionAnalytical testing
- An HPLC method in which the mobile-phase composition changes during the run, usually increasing the organic solvent to elute more strongly retained components.
- GSRSRegulatory
- FDA’s Global Substance Registration System, the registry that assigns UNIIs and records substance names, structures and CAS numbers.
H
- HeadspaceHandling and storage
- The gas-filled space above the contents of a sealed vial. It is sometimes filled with an inert gas such as nitrogen.
- Health Canada advisoryRegulatory
- A public notice from Health Canada, such as its April 2026 warning naming peptide products it has seized as unauthorized drugs.
- Heavy metals testingAnalytical testing
- Analysis, often by ICP-MS, for trace elements such as lead, arsenic, cadmium and mercury. It is a separate test from purity and identity.
- HPLCAnalytical testing
- High-performance liquid chromatography. A method that separates the components of a sample as it is pumped through a packed column under pressure; for peptides it is the standard way to measure purity. How to read a COA
- HydrophobicityPeptide chemistry
- The tendency of a molecule or residue to avoid water. It influences solubility and retention time in reversed-phase HPLC.
- HygroscopicHandling and storage
- Tending to absorb moisture from the air. Many lyophilized peptides are hygroscopic, which is why a cold vial should reach room temperature before opening.
I
- INNRegulatory
- International Nonproprietary Name: the official generic name of a pharmaceutical substance, assigned by the World Health Organization.
- ISO/IEC 17025Analytical testing
- The international standard for the competence of testing and calibration laboratories. Accreditation is granted per scope of tests, so it should be checked for the specific method used.
- Isoelectric point (pI)Peptide chemistry
- The pH at which a peptide carries no net charge. Solubility is often lowest near the pI.
K
- Karl Fischer titrationAnalytical testing
- A standard method for measuring water content in a solid or liquid sample, used to account for moisture in lyophilized peptides.
L
- Lab notebookQuality and documentation
- The dated record of experiments, materials and observations, including lot numbers of materials used. Documentation templates
- LC-MSAnalytical testing
- Liquid chromatography coupled to mass spectrometry. Each separated peak can be identified by its mass, which helps assign impurities.
- Limit of detection (LOD)Analytical testing
- The smallest amount of a substance a method can reliably detect, though not necessarily quantify.
- Limit of quantitation (LOQ)Analytical testing
- The smallest amount of a substance a method can measure with acceptable accuracy and precision.
- LotQuality and documentation
- A quantity of material produced and tested together, so every unit in it shares the same COA. Also called a batch. How to verify your lot
- Lot numberQuality and documentation
- The identifier that links a vial to its lot and therefore to its COA. How to verify your lot
- LyophilizationHandling and storage
- Freeze-drying: removing water from a frozen sample under vacuum by sublimation. Peptides are usually supplied lyophilized because the dry solid is more stable.
- Lyophilized powderHandling and storage
- The dry solid, often a cake or powder, left after freeze-drying. Its appearance can vary between lots without indicating a quality difference.
M
- m/zAnalytical testing
- Mass-to-charge ratio, the quantity a mass spectrometer measures. A peptide of mass M carrying n protons appears at (M + n×1.007)/n.
- MALDI-TOFAnalytical testing
- Matrix-assisted laser desorption/ionization with time-of-flight detection. An MS method that typically gives singly charged ions and is common for peptide mass confirmation.
- Mass spectrometry (MS)Analytical testing
- A technique that measures the mass-to-charge ratio of ionized molecules. On a peptide COA it confirms identity by matching the observed mass to the expected molecular weight. How to read a COA
- Method validationAnalytical testing
- Documented evidence that an analytical method is fit for purpose, covering properties such as specificity, accuracy, precision, linearity and range.
- Mobile phaseAnalytical testing
- The liquid pumped through an HPLC column. For peptides it is typically water and acetonitrile, often with a small amount of TFA or formic acid.
- Molecular formulaPeptide chemistry
- The number of atoms of each element in one molecule, such as C16H30N4O4. Salt forms have a different formula from the free peptide.
- Molecular weightPeptide chemistry
- The mass of one mole of a molecule, in g/mol. Listed values usually refer to the free peptide unless a salt form is stated. Compound references
- Monoisotopic massAnalytical testing
- The mass of a molecule calculated using the most abundant isotope of each element. High-resolution MS results are usually compared with this value.
N
- N-terminusPeptide chemistry
- The end of a peptide chain with a free amino group; by convention sequences are written starting here.
- NDARegulatory
- New Drug Application: the application through which FDA approves a new drug product in the United States.
- Net peptide content (NPC)Analytical testing
- The percentage by weight of a lyophilized powder that is the peptide itself, with the rest being water, counter-ions and other non-peptide material. It is different from HPLC purity.
- Norleucine (Nle)Peptide chemistry
- A non-proteinogenic amino acid that is an isomer of leucine, often used in synthetic peptides in place of methionine.
O
- One-letter codePeptide chemistry
- The single-letter abbreviations for amino acids, such as G for glycine, K for lysine and P for proline, used to write sequences compactly.
- Out of specification (OOS)Analytical testing
- A test result that falls outside its acceptance criteria. An OOS result is normally investigated before a lot is released or rejected.
- OxidationPeptide chemistry
- A chemical change, often at methionine, cysteine or tryptophan residues, that can form impurities during synthesis or storage.
P
- Peak areaAnalytical testing
- The area under a peak in a chromatogram. Purity by HPLC is usually reported as the main peak area divided by the total area of all peaks.
- PeptidePeptide chemistry
- A chain of amino acids joined by peptide bonds. Chains of up to about 50 amino acids are usually called peptides; longer chains are usually called proteins.
- Peptide bondPeptide chemistry
- The amide bond formed between the carboxyl group of one amino acid and the amino group of the next.
- Protecting groupPeptide chemistry
- A temporary chemical group that blocks a reactive site during synthesis and is removed afterwards.
- PubChem CIDRegulatory
- The compound identifier in PubChem, the public chemistry database run by the U.S. National Library of Medicine.
R
- ReconstitutionHandling and storage
- Dissolving a lyophilized solid in a solvent to make a solution for laboratory work. The solvent and concentration depend on the experiment and the peptide’s solubility.
- Reference standardAnalytical testing
- A well-characterized material of known identity and purity used to calibrate a method or confirm identity by comparison.
- Release testingQuality and documentation
- The tests a lot must pass before it is made available.
- Research use only (RUO)Regulatory
- A designation for materials sold for laboratory research, not for use in humans or animals, and not as drugs, foods, cosmetics or supplements.
- Residual solventsAnalytical testing
- Traces of solvents left over from synthesis or purification, such as acetonitrile, typically measured by gas chromatography when tested.
- ResiduePeptide chemistry
- An amino acid unit within a peptide chain, so called because water is lost when the peptide bond forms.
- Retained sampleQuality and documentation
- A portion of a lot kept back after release so it can be re-tested later if needed.
- Retention timeAnalytical testing
- The time after the sample enters the column at which a component elutes from the column and appears as a peak. Under fixed conditions it is characteristic of that component.
- Retest dateQuality and documentation
- The date by which a stored material should be re-examined to confirm it still meets its specification.
- RP-HPLCAnalytical testing
- Reversed-phase HPLC. The most common HPLC mode for peptides, using a non-polar column (often C18) and a water–acetonitrile gradient so that more hydrophobic molecules elute later.
S
- Safety Data Sheet (SDS)Quality and documentation
- A standardized document describing a chemical’s hazards, safe handling, storage and emergency measures in 16 sections.
- Salt formPeptide chemistry
- The specific peptide–counter-ion combination supplied, for example peptide acetate. It affects formula, weight and sometimes CAS number.
- SeptumHandling and storage
- The rubber stopper in a vial’s crimp seal, which keeps the contents closed to air.
- SequencePeptide chemistry
- The order of amino acids in a peptide, written from the N-terminus to the C-terminus, often in one-letter or three-letter codes.
- Serial numberQuality and documentation
- A unique identifier for an individual vial. On Ageless vials it links that vial to its lot and COA. How to verify your lot
- Solid-phase peptide synthesis (SPPS)Peptide chemistry
- The standard method for making synthetic peptides, in which amino acids are added one at a time to a chain anchored on a resin bead.
- SpecificationAnalytical testing
- The set of tests and acceptance criteria a lot must meet, such as "purity by HPLC ≥ 98%".
- Standard operating procedure (SOP)Quality and documentation
- A written step-by-step instruction for carrying out a routine task the same way each time.
- Stationary phaseAnalytical testing
- The packing material inside a chromatography column that interacts with the sample, such as C18-bonded silica in reversed-phase HPLC.
- Sterile waterHandling and storage
- Water that has been sterilized and contains no added preservative.
- Storage temperatureHandling and storage
- The temperature range stated for keeping a material, such as -20°C for sealed lyophilized vials. Product-specific conditions appear on the product page and SDS. Storage lookup
- Supplier qualificationQuality and documentation
- The process of checking that a supplier can reliably provide material that meets requirements, for example by reviewing COAs, testing and documentation. Supplier QA checklist
T
- TFA saltPeptide chemistry
- A peptide supplied with trifluoroacetate counter-ions, which commonly remain after reversed-phase purification with TFA in the mobile phase.
- Third-party testingAnalytical testing
- Testing performed by a laboratory independent of the manufacturer or seller, so the result does not rely on the supplier’s own lab.
- TraceabilityQuality and documentation
- The ability to follow a unit back through its lot, testing and records.
- Truncated sequencePeptide chemistry
- An impurity in which chain growth stopped early, producing a shorter peptide.
U
- UNIIRegulatory
- Unique Ingredient Identifier: a code assigned by FDA’s Global Substance Registration System (GSRS) to a substance based on its structure.
- UPLCAnalytical testing
- Ultra-performance liquid chromatography. A form of HPLC that uses smaller column particles and higher pressure for faster runs and sharper peaks.
- UV detection (214/220 nm)Analytical testing
- Detection of peptides by UV absorbance, commonly at 214 or 220 nm where the peptide bond absorbs. The wavelength used is normally stated on the COA.
W
- WADA Prohibited ListRegulatory
- The World Anti-Doping Agency’s annual list of substances and methods banned in sport, organized into categories such as S0 and S2.

